Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

0-5V Toggle Accelerator

Model FT-21X, installation diameter Ø22 mm

FT-21X could only be installed at the right side of driver / rider. We supply also the model 130X toggle throttle which could be installed at both sides of driver / rider.

Wiring (mating connector is included):

• Red: DC source positive (B+)
• Black: DC source negative (B-)
• White: output 0-5V

Specifications:

• Model: FT-21X Hall effect electric throttle
• Input voltage (volt): 32-52V DC
• Signal output: 0-5V
• Maximum throttle output: 5.0V
• Minimum throttle output: 0V
• Could be installed on a round tube of Ø22 mm
• Tighten with hexagon bolt (M3 - 3 mm metric hex tool / Allen Key)
• Mating connector is included
• Throttle wire length: 150 cm
• Net weight: 0.1 kg (with mating connector)

The Hall effect FT-21X electric throttle provides an analog 0-5V output proportional to throttle position, working with electric vehicle (electric cart, scooter & ATV) motor speed controllers. It is also widely used as a 0-5V voltage source for different applications, for example motor test, pump drive motor speed control and electric valve control.

0-5V Toggle Accelerator

Model FT-21X, installation diameter Ø22 mm

FT-21X could only be installed at the right side of driver / rider. We supply also the model 130X toggle throttle which could be installed at both sides of driver / rider.

Wiring (mating connector is included):

• Red: DC source positive (B+)
• Black: DC source negative (B-)
• White: output 0-5V

Specifications:

• Model: FT-21X Hall effect electric throttle
• Input voltage (volt): 32-52V DC
• Signal output: 0-5V
• Maximum throttle output: 5.0V
• Minimum throttle output: 0V
• Could be installed on a round tube of Ø22 mm
• Tighten with hexagon bolt (M3 - 3 mm metric hex tool / Allen Key)
• Mating connector is included
• Throttle wire length: 150 cm
• Net weight: 0.1 kg (with mating connector)

The Hall effect FT-21X electric throttle provides an analog 0-5V output proportional to throttle position, working with electric vehicle (electric cart, scooter & ATV) motor speed controllers. It is also widely used as a 0-5V voltage source for different applications, for example motor test, pump drive motor speed control and electric valve control.