Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

Heavy duty DC relay ZL180

Working voltage 12 ~ 48V / working current 120 ~ 200A

Connector Kit

KEY FEATURES

• Model: ZL180 (WM686 / RL180) SPST NO
• Nominal Current Rating:
  • 100A Ith.; continuous load working current ≤ 75A
  • 120A Ith.; continuous load working current ≤ 90A
  • 200A Ith.; continuous load working current ≤ 150A
• Working Voltage:
  • 12V
  • 24V
  • 36V
  • 48V
• Coil Consumption:
  • Intermittent work: 4.8W (utilization factor ≤ 25%), typical application: motor starter, emergency brake, etc.
  • Continuous work: 2.4W (utilization factor ≤ 50%), typical application: hydraulic pump motor control, electric air compressor motor control, etc.
  The utilization factor (or use factor) is the ratio of the time that a piece of equipment is in use to the total time that it could be in use. In electrical engineering, utilization factor is the ratio of the maximum working time to the total time, for example the ratio 25% means that the ZL180 can maximally work 15 minutes (continuously or in average) in one hour.
• Contact Resistance: ≤ 50mΩ
• Isolation Resistance: ≥ 1.0MΩ
• Electric Life: 100,000 times
• Mechanic Life: 10,000,000 times
• Electrical Isolation:
  • Between open contacts: 2000VAC
  • Between coil contacts: 1000VAC
• Connector kit included:
  • control: wires with 1/4" (6.3mm) Spade Contactors
  • load: M6 lug terminal, rated for 50A (continuous load), suitable for 4 ~ 10 mm² wire (Need lug crimping tool? Please click here ...)
• Working Temperature: -25°C ~ +100°C
• Product Weight: 100 g

Wiring Diagrams:	Dimensions:
SPST Normal Open

ZL180 is a heavy duty DC relay, rated for upto 200A load.

KEY FEATURES

• Model: ZL180 (WM686 / RL180) SPST NO
• Nominal Current Rating:
  • 100A Ith.; continuous load working current ≤ 75A
  • 120A Ith.; continuous load working current ≤ 90A
  • 200A Ith.; continuous load working current ≤ 150A
• Working Voltage:
  • 12V
  • 24V
  • 36V
  • 48V
• Coil Consumption:
  • Intermittent work: 4.8W (utilization factor ≤ 25%), typical application: motor starter, emergency brake, etc.
  • Continuous work: 2.4W (utilization factor ≤ 50%), typical application: hydraulic pump motor control, electric air compressor motor control, etc.
  The utilization factor (or use factor) is the ratio of the time that a piece of equipment is in use to the total time that it could be in use. In electrical engineering, utilization factor is the ratio of the maximum working time to the total time, for example the ratio 25% means that the ZL180 can maximally work 15 minutes (continuously or in average) in one hour.
• Contact Resistance: ≤ 50mΩ
• Isolation Resistance: ≥ 1.0MΩ
• Electric Life: 100,000 times
• Mechanic Life: 10,000,000 times
• Electrical Isolation:
  • Between open contacts: 2000VAC
  • Between coil contacts: 1000VAC
• Connector kit included:
  • control: wires with 1/4" (6.3mm) Spade Contactors
  • load: M6 lug terminal, rated for 50A (continuous load), suitable for 4 ~ 10 mm² wire (Need lug crimping tool? Please click here ...)
• Working Temperature: -25°C ~ +100°C
• Product Weight: 100 g

Connector kit:

Wiring Diagram:

SPST Normal Open

Dimensions: