May 1st to 5th

Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

Buy accessories (not sell as individual part, only available for shipping with your order of connectors):

SMH 50A electrical connector model SY50 are used to join power source (batteries) and device (electric motor, pump, etc.) for creating an electrical circuit, and serving as a permanent electrical joint.

Accessories available:

• Pull Handle
• Connector protection cover

Hard Plastic Cover

Specifications:

• DC power connector rated for 50A / 600V
• Impact resistant polycarbonate housing offers high physical strength and superior dielectric properties
• Silver-plated solid copper contacts offer low resistance for superior conductivity
• Self cleaning contact design resists arcing by keeping conductive surfaces clean and free of corrosion
• Contacts have flared and heat treated barrels which readily accept fine stranded wire
• Integral stainless steel springs maintain constant pressure on the contact to insure a consistent, low-resistance connection

Contact wiring options:

Pull Handle

Key features

• Brand: SMH
• Model: SY50 / SY6319G2, each connector assemblage includes one housing and two tips (contacts) (the pull handle and cover are not included in the connector assemblage, must be bought separately)
• Part number: 263-110
• UPC: 844632036736
• Housing Color: gray
• Net weight: 0.02 kg (0.044 lbs.)
• Current rating (ampers): 50A on 6 AWG wire produces 30°C rise
• Voltage limit (volts): 600
• Insulation with standing test voltage (volts): 2200V DC
• Operating temperature range: -20° to 105° C
• Maximum wire insulation diameter: 11 mm (0.44")
• Average contact retention force: approximately 50 lbs (22.7 kg)
• Average contact resistance: 200 µΩ with 1-1/4" (32 mm) of 6 AWG wire
• Vibration resistance: excellent
• Mating cycles: 10,000 times, for disconnect use only
• Environmental restrictions: protected - no hydrocarbon fluids
• Flammability rating: UL94 V-0
• Average mating and unmating force: 15 lbs (6.75 kg)
• Recognized under the component program of Underwriters Laboratories, Inc. File No. E81817
• Listed by Canadian Standards Association for use with certified equipment. File No. LR82704

Buy accessories (not sell as individual part, only available for shipping with your order of connectors):

SMH 50A electrical connector model SY50 are used to join power source (batteries) and device (electric motor, pump, etc.) for creating an electrical circuit, and serving as a permanent electrical joint.

Accessories available:

• Pull Handle
• Connector protection cover

Hard Plastic Cover

Specifications:

• DC power connector rated for 50A / 600V
• Impact resistant polycarbonate housing offers high physical strength and superior dielectric properties
• Silver-plated solid copper contacts offer low resistance for superior conductivity
• Self cleaning contact design resists arcing by keeping conductive surfaces clean and free of corrosion
• Contacts have flared and heat treated barrels which readily accept fine stranded wire
• Integral stainless steel springs maintain constant pressure on the contact to insure a consistent, low-resistance connection

Contact wiring options:

Pull Handle

Key features

• Brand: SMH
• Model: SY50 / SY6319G2, each connector assemblage includes one housing and two tips (contacts) (the pull handle and cover are not included in the connector assemblage, must be bought separately)
• Part number: 263-110
• UPC: 844632036736
• Housing Color: gray
• Net weight: 0.02 kg (0.044 lbs.)
• Current rating (ampers): 50A on 6 AWG wire produces 30°C rise
• Voltage limit (volts): 600
• Insulation with standing test voltage (volts): 2200V DC
• Operating temperature range: -20° to 105° C
• Maximum wire insulation diameter: 11 mm (0.44")
• Average contact retention force: approximately 50 lbs (22.7 kg)
• Average contact resistance: 200 µΩ with 1-1/4" (32 mm) of 6 AWG wire
• Vibration resistance: excellent
• Mating cycles: 10,000 times, for disconnect use only
• Environmental restrictions: protected - no hydrocarbon fluids
• Flammability rating: UL94 V-0
• Average mating and unmating force: 15 lbs (6.75 kg)
• Recognized under the component program of Underwriters Laboratories, Inc. File No. E81817
• Listed by Canadian Standards Association for use with certified equipment. File No. LR82704