Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

2-Wire / 3-Wire 5KΩ Potentiometer Throttle

Foot pedal accelerator of forklift, with internal throttle switch

Overview:

The foot pedal throttle EFP713-0502 is a 0-5KΩ potentiometer throttle, is widely used in forklift (typical application: HANGCHA), golf cart and other electric mobility vehicles.

Specifications:

• The foot pedal could be installed at both ends of rotating shaft
• Signal output: 0-5KΩ ± 0.1KΩ
• 4-Pin or 5-Pin connectors available
• Solid metal case, ingress protection: IP55
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Key Features:

• Model: EFP713-0502, two connector types are available (corresponding to different controller throttle type settings):
  • EFP713-0502-4P (2-Wire 0-5KΩ potentiometer throttle): 4-Pin Connector (typical application: HANGCHA CPD10-30 / CPD10-30T / CPD30J)
  • EFP713-0502-5P (3-Wire 0-5KΩ potentiometer throttle): 5-Pin Connector (typical application: HANGCHA CPD20-25)
• Switch ON / OFF signal: 0V - DC power source voltage
• Operation temperature range: -55°C –120°C
• Storage temperature range: -40°C - 80°C
• Mechnical lifespan: 1,000,000 times

Wiring instruction & diagram:

Dimensions:

About the throttle switch:

Most electric vehicle throttles have a throttle switch. Depending on the application requirement, the throttle switch can be used for different purposes:

• Main contactor control: feeding power to main contactor's control coil.
• Forward / Reverse DC contactor interlock: feeding power to F / R switch through the throttle switch. The F / R contactor will only be activated when the throttle switch is "ON" (for avoiding accidental vehicle movement in case that the F / R switch is not at neutral position when key switch is turned on).
• Lifting / Lowering interlock: when forklift is in accelerating mode, the lifting or lowering function will be inhibited, for avoiding unsafe operation.
• Accelating alarm: sending signal to a display device (for example a lamp) for showing the accelerating status of vehicle.
• Etc.

For 0-5KΩ throttle model EFP713-0502, you may choose a power source of variable DC voltage to control other devices through its internal switch. For example, your vehicle battery voltage is 48V, but you have a forward / reverse contactor of control coil rated for 12VDC, then you may use a 48V to 12V DC-DC converter to feed the 12VDC power to F / R switch through the throttle switch, for controlling the F / R contactor.

Caution: we don't recommend to apply a voltage which is higher than the voltage rate of main power source (vehicle battery) to the throttle switch.

2-Wire / 3-Wire 5KΩ Potentiometer Throttle

Foot pedal accelerator of forklift, with internal throttle switch

Overview:

The foot pedal throttle EFP713-0502 is a 0-5KΩ potentiometer throttle, is widely used in forklift (typical application: HANGCHA), golf cart and other electric mobility vehicles.

Specifications:

• The foot pedal could be installed at both ends of rotating shaft
• Signal output: 0-5KΩ ± 0.1KΩ
• 4-Pin or 5-Pin connectors available
• Solid metal case, ingress protection: IP55
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Key Features:

• Model: EFP713-0502, two connector types are available (corresponding to different controller throttle type settings):
  • EFP713-0502-4P (2-Wire 0-5KΩ potentiometer throttle): 4-Pin Connector (typical application: HANGCHA CPD10-30 / CPD10-30T / CPD30J)
  • EFP713-0502-5P (3-Wire 0-5KΩ potentiometer throttle): 5-Pin Connector (typical application: HANGCHA CPD20-25)
• Switch ON / OFF signal: 0V - DC power source voltage
• Operation temperature range: -55°C –120°C
• Storage temperature range: -40°C - 80°C
• Mechnical lifespan: 1,000,000 times

Wiring instruction & diagram:

Dimensions:

About the throttle switch:

Most electric vehicle throttles have a throttle switch. Depending on the application requirement, the throttle switch can be used for different purposes:

• Main contactor control: feeding power to main contactor's control coil.
• Forward / Reverse DC contactor interlock: feeding power to F / R switch through the throttle switch. The F / R contactor will only be activated when the throttle switch is "ON" (for avoiding accidental vehicle movement in case that the F / R switch is not at neutral position when key switch is turned on).
• Lifting / Lowering interlock: when forklift is in accelerating mode, the lifting or lowering function will be inhibited, for avoiding unsafe operation.
• Accelating alarm: sending signal to a display device (for example a lamp) for showing the accelerating status of vehicle.
• Etc.

For 0-5KΩ throttle model EFP713-0502, you may choose a power source of variable DC voltage to control other devices through its internal switch. For example, your vehicle battery voltage is 48V, but you have a forward / reverse contactor of control coil rated for 12VDC, then you may use a 48V to 12V DC-DC converter to feed the 12VDC power to F / R switch through the throttle switch, for controlling the F / R contactor.

Caution: we don't recommend to apply a voltage which is higher than the voltage rate of main power source (vehicle battery) to the throttle switch.